Eagle-electronics CUDA 240I S Bedienungsanleitung PDF herunterladen

Pub. 988-0152-081

Addendum I

Additional Instructions for

Eagle Cuda 240i S/GPS

Your sonar/GPS unit, the Cuda 240i, functions exactly like the Cuda

240 described in the manual provided (part 988-0152-012). In addition,

the Cuda 240i contains a communications port for NMEA 0183 output.

The instructions for connecting data cables and setting up the

communications port appear in this addendum.

NMEA 0183 Data Cable Connections

NMEA is a standard communications format for marine electronic

equipment. The Cuda 240i can send information to any device that

receives NMEA 0183 data. This allows the unit to work with VHF

marine radios equipped with the Digital Selective Calling (DSC)

distress call feature.

To send NMEA 0183 data, the Cuda 240i has one NMEA 0183 version

2.0 communication port. The com port can be used to send NMEA

formatted data such as your current position.

The provided Cuda 240i data cable plugs into the accessory socket on the

right side of the back of your unit's case. The data cable ends in two wires

that connect to your VHF radio or other NMEA device. The Cuda 240i uses

the yellow wire to transmit and the black shield wire for signal ground.

NOTE:

Some VHF radios, such as the popular Uniden



brand, have input

levels which require use of an additional diode and resistor built into

the Cuda 240i data cable. This is Wiring Diagram A, which is

described on page 2. The majority of the DSC radios will work with the

resistor and diode as provided by Eagle.

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Eagle Cuda 240i S/GPS

1Pub. 988-0152-081Addendum IAdditional Instructions forEagle Cuda 240i S/GPSYour sonar/GPS unit, the Cuda 240i, functions exactly like the Cuda240 des

Seite 2 - Wiring Diagram "A"

2A few other radio brands (and other electronic devices) that meet theNMEA 0183 standard won't need these adapters and you will have toremove the

Seite 3

3Twist the exposed wires together as shown in the following figures. Ifyou're using a Uniden or similar radio, connect the radio's NMEA Wire

Seite 4

4After taping the wire ends individually, wrap the entire connectionwith electrical tape as shown. This will help protect from moisture andprevent the

Seite 5

5After you've removed the adapter segment, use wire pliers to expose theends of the five remaining wires in the cable. Cut off the black, blue an

Seite 6 - OM PORT

6Communications Port ConfigurationNow that you have the devices connected, use the Com Port commandin the System Setup Menu to make them communicate.

Seite 7 - Configure NMEA

7To activate NMEA Output:From the Communication Ports menu, press ↓ to highlight NMEAOutput. Press ENT to check (turn on) or uncheck (turn off) the NM

Seite 8

8• GGA transmits time, position and fix related data.• APB transmits autopilot information.• RMC and RMB transmits navigation information messages.

Kommentare zu diesen Handbüchern

Keine Kommentare

Eagle-electronics CUDA 240I S Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sport und Erholung Eagle-electronics CUDA 240I S herunter. Eagle Electronics CUDA 240I S User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sport und Erholung Eagle-electronics CUDA 240I S